DLZ-15單螺桿榨油機性能簡介

Brief Introduction of DLZ Single Screw Oil Press

一用途與特點

1^st.  Application and Characteristics

1．     用途

Application

本機適用于芝麻等高含油油料油脂的榨取。油料壓榨前應進行預處理（蒸炒）。

The machine is suitable for extracting oil from materials with high oil content. Preprocessing of oil material should be made before its being processed.

2． 主要特點

The main Characteristics

本機工作原理新穎，結構合理，運轉平穩，機械性能良好；主機傳動系統的主要零部件如榨螺等均采用優質合金鋼，并經嚴格的熱處理，經久耐用，榨螺使用壽命≥10個月。

The rationale of the machine is an innovation compared with previous ones and it operates steady with reasonable structures and brilliant mechanical performances. The main transmission is composed of some important components, such as extracting screws of superior alloy steel with strict heat processing. The durability is perfect, for the estimated longevity is more than 10 months. 

榨籠和主軸采用雙階壓榨設計模式，具有大的壓縮比和長徑比，不僅使本機有良好的壓榨工藝特性，而且有強有力的軸向推進作用，油料不易出現滑膛現象，同時獨特多邊形榨條結構具有最大的出油效率。

Screw cages and the main shaft adopts double order squeeze with large compression ratio and length-radius ratio. Either makes it the machine to run in a great pressing performance or it promises a great propelling force along the axial direction. Thus it is hard for oil material to slide within the machine barrel. In addition, the pressing strip with special polygon makes an outstanding contribution to the highest efficiency of pressing oil.

二．主要構造

2^nd. Main Structure

DLZ15.0型芝麻榨油機外形如圖一所示。該機主要由動力系統、喂料機構、榨螺裝配、榨籠裝配、出油機構、出餅機構、機架、軸承裝配、止推軸承裝配和冷卻系統等組成。

The Structure of DLZ15.0 for pressing oil from sesame is illustrated by the following graph below. It is composed of power system, feeding system, pressing screw system, pressing cage system, oil outlet system, oil cake outlet system, base support, bearing system, thrust bearing assembly as well as cooling system.

圖一  DLZ-15榨油機示意圖

三．工作原理與主要技術參數

3^rd, Rationale and the main parameters

1． 工作原理

Rationale

   啟動電機，動力及運動經減速機直接傳遞至螺旋軸。打開喂料閥板，料斗內的油料通過重力進入螺旋軸的輸送段，在榨螺、榨圈、條排和刮刀等構件的綜合作用下，油料不斷被擠壓、剪切粉碎，在榨膛內經過連續壓榨，油液不斷流出，榨料中的殘油愈來愈少，最后經出餅機構成瓦片狀餅塊排出機外。

Switching on motor, then power and motion will be transmitted directly to screw shaft. The oil material in the hopper will be move downward by the gravity to the inlet of screw transmission after the feeding panel has been opened. Hence oil material will be propelled forward by components, including pressing screws, pressing rings and scrapers. During the process, the oil material will continually be pressed while the oil is flowing out. Finally, less and less oil has been left behind in the cells and the chunk will be formed after it is coming out of the oil cake outlet.

2． 主要技術參數

The main parameters

   主要技術參數見表1

   The main parameters in table 1

表1  榨機性能參數一覽表

Table 1 Performance Parameters of Oil Press

表2  DLZ-15螺旋榨油機設備組成表

Table 2 DLZ Oil Press Facilities

 四 圖片示例

4^th . Graphic Examples

樣機實例

Prototype

芝麻餅殘油: 6-9% (視不同品種)

Residue Sesame Oil Percentage:6-9%(Varies with types)