中国福彩|下载app下载

                                          Skip navigation Accessibility information

                                          Your global supplier for materials

                                          Form information

                                          Bar

                                          Bar

                                          A straight length of rectangular, square or oval section material.

                                          Tolerances        
                                          Section dimensions: =<10mm  ±10% >10mm ±1mm
                                          Length: <100mm  ±1mm >=100mm +5%/-1%

                                           

                                          Bolt

                                          Bolt

                                          A threaded pin that can be screwed into a nut or a tapped hole to fasten items together. Bolts are available with different head styles and also in metric and inch-threaded sizes.

                                          Tolerances        
                                          Ceramics: ANSI B18.6.7M-1985  

                                           

                                          Chopped Fibre

                                          Chopped Fibre

                                          Fibres cut into short lengths called cut, staple or chopped fibre.

                                          Tolerances        
                                          Fibre diameter: ±25%      
                                          Number of strands: ±10%      
                                          Tex number: ±10%      
                                          Length: +5%/-1%      

                                           

                                          Crucible

                                          Crucible

                                          A vessel in which other materials may be heated or melted, usually at high temperatures.

                                          Tolerances        
                                          Height: ±10%      
                                          Wall Thickness: ±10%      
                                          Outside Dimensions: ±10%      

                                           

                                          Fabric

                                          Fabric

                                          Woven fabrics are made by the regular interlacing of two arrays of yarns at right angles to each other, these being referred to as the warp and weft (see also Non-woven fabric)

                                          Tolerances        
                                          Fabric thickness: ±25%      
                                          Number of yarns: ±10%      
                                          Tex number: ±10%      
                                          Size (linear dimension): <100mm ±5mm >=100mm ±5%

                                           

                                          Fibre

                                          Fibre

                                          Yarns or tows consisting of several approximately parallel individual filaments, each filament usually being smaller in diameter than a monofilament.

                                          Tolerances        
                                          Fibre diameter: ±25%      
                                          Number of strands: ±10%      
                                          Tex number: ±10%      
                                          Length: ±5% / -1%      

                                           

                                          Film

                                          Film

                                          A non-metallic sheet material with a thickness <0.5mm.

                                          Tolerances        
                                          Thickness: ±20%      
                                          Size (linear dimension): <100mm  ±1mm >=100mm +2%/-1%

                                           

                                          Flake

                                          Flake

                                          Flat, irregularly shaped pieces of material.  A maximum flake size is indicated, but individual flakes may vary greatly in size.

                                          Tolerances:  Dimensions shown are nominal

                                          Foam

                                          Foam

                                          A low density, permeable structure of cells and continuous ligaments offering a high surface area to volume ratio, and also a high strength to weight ratio.  Owing to the nature of this material, dimensions are nominal.

                                          Foil

                                          Foil

                                          Thin sheets of pure metal and metal alloys.  Due to their fragile nature, some foils are coated on one side with an acrylic or polyester support.  Where foils are supported they are indicated in the detailed item description.

                                          Light Tight Foil:  LT Foils are supplied without visible pinholes whereas NLT foils will normally contain pinholes, but may occasionally be free from pinholes.  Foils 0.025mm or more in thickness are supplied LT unless otherwise stated.  Foils less than 0.025mm are normally supplied NLT, however, if you require LT foils, please ask.  An additional charge may be made if we are able to supply LT foils.

                                          Tolerances        
                                          Thickness: <0.010mm ±25%    
                                            0.010-0.050mm ±15%    
                                            >0.050mm ±10%    
                                          Size (linear dimension): <100mm ±1mm >=100mm +2%/-1%

                                           

                                          Granule

                                          Granule

                                          Pellets of an approximately regular shape.  Granules may vary in size and, therefore, the dimensions stated are nominal.  In addition, the shape of a granule may vary from item to item.

                                          Tolerances: Dimensions shown are nominal.

                                          Honeycomb

                                          Honeycomb

                                          A cellular structure similar in appearance to natural honeycomb.  Owing to the nature of this material, dimensions are nominal.

                                          Insulated Wire

                                          Insulated Wire

                                          A single or multiple flexible strand of metal or alloy with an insulating sheath.

                                          Tolerances        
                                          Wire diameter: ±10%      
                                          Length: ±5%/-1%      

                                           

                                          Insulation thickness: Nominal values only

                                          Laminate

                                          Laminate

                                          Layers of material which have been bonded together by the use of heat, pressure and, possibly, adhesive.

                                          Tolerances        
                                          Thickness: ±10%      
                                          Size (linear dimension): =<100mm ±1mm >100mm ±2%/-1%

                                           

                                          Liquid

                                          Liquid

                                          A state of matter between a solid and a gas in which the shape of a given mass depends on the container, the volume being independent.

                                          Lump

                                          Lump

                                          A solid piece of material with no defined shape.

                                          Tolerances:  Dimensions shown are nominal

                                          Mesh

                                          Mesh

                                          Mesh is available as either a woven wire or electroformed product; in all cases, the quoted aperture sizes are nominal. Wire mesh: a material which is woven from metal wires to provide a thin grid with a regular series of holes. Electroformed mesh: a product made by electroplating the mesh geometry through a mask onto a substrate which is subsequently etched away.

                                          Tolerances        
                                          Thickness: woven: ±10% electroformed: ±20%
                                          Wire diameter: ±10%      
                                          Size (linear dimension): <100mm ±1mm >=100mm +2%/-1%

                                           

                                          Metalised Film

                                          Metalised Film

                                          Film which is coated with a metal. The thickness of the metal is measured and described in terms of the material's specific electrical resistance in ohms per square.

                                          Tolerances        
                                          Thickness: ±10%      
                                          Size (linear dimension): <100mm ±1mm >=100mm +2%/-1%

                                           

                                          Microfoil

                                          Microfoil

                                          An extremely thin sheet of metal or alloy mounted on a permanent support. This support cannot be removed without destroying the Microfoil.

                                          Tolerances        
                                          Thickness: ±30%      
                                          Size: ±20%      

                                           

                                          Microleaf

                                          Microleaf

                                          An extremely thin sheet of metal mounted on a removable support. Microleaf is not available for metals which are too brittle to be free standing. Microleaf is mounted on a specially treated support which allows separation of the metal film from the support. Full instructions on the method of removal are issued with each Microleaf supplied.

                                          Tolerances        
                                          Thickness: ±30%      
                                          Size: ±20%      

                                           

                                          Monofilament

                                          Monofilament

                                          A single strand of a non-metallic material.

                                          Tolerances        
                                          Diameter: ±20%      
                                          Length: +5%/-1%      

                                           

                                          Non-Woven Fabric

                                          Non-Woven Fabric

                                          Non-woven fabrics are made by methods other than weaving or knitting, the yarns and fibres being held together, often quite loosely, by means other than geometric interlacing. Due to the open and porous nature of this material, all other dimensions are nominal.

                                          Tolerances        
                                          Size (linear dimension): <100mm ±5mm >100mm ±5%

                                           

                                          Nut

                                          Nut

                                          Generally a flat piece of material with a threaded hole which can be screwed onto a bolt to fasten items together. Nuts typically have a hexagonal external shape. Nuts are available in metric and inch-threaded sizes.

                                          Tolerances        
                                          Ceramics: ANSI B18.2.4.1M-1979 (R1995)  

                                           

                                          Powder

                                          Powder

                                          Small particles with an approximately defined size range. Those materials described as alloy precursors are not true alloys - they are made by sintering a blend of powders of the component metals to achieve alloying by diffusion.  The resultant cake is ground and sieved to the required particle size range. Unless otherwise stated, the particle sizes shown are for guidance only. We do not guarantee either any particular size distribution between the quoted minimum and maximum sizes, or a specific particle shape.

                                          Tolerances:  Dimensions shown are nominal

                                          Rod

                                          Rod

                                          A straight length of circular section material.

                                          Tolerances        
                                          Diameter: <10mm ±10%    
                                            Polymer ±20%/-10%    
                                            Ceramic ±20%/-10%    
                                            >10mm ±5%    
                                            Polymer ±20%/-10%    
                                            Ceramic ±20%/-10%    
                                          Length: <100mm ±1mm >=100mm +5%/-1%

                                           

                                          Sheet

                                          Sheet

                                          Flat material with a thickness >0.5mm.

                                          Tolerances        
                                          Thickness:   ±10%    
                                            Ceramic ±20%    
                                            Composite ±20%    
                                            Polymer ±20%    
                                          Size (linear dimension): <100mm ±1mm >=100mm +2%/-1%

                                           

                                          Single Crystal

                                          Single Crystal

                                          A material grown as a monocrystal, generally to a specific orientation, dimension and surface finish. It may contain a dopant. Single crystals are usually made to order.

                                          Tolerances        
                                          Orientation: ±3°      

                                           

                                          Size: Sizes shown are nominal

                                          Sphere

                                          Sphere

                                          Small balls which are precision ground.

                                          Tolerances        
                                          Diameter: ±5%      

                                           

                                          Sputtering Target

                                          Sputtering Target

                                          A high purity material used as a source for sputtering, a cold vapourisation process in which atoms are physically removed from the target surface by ion bombardment.

                                          Tolerances        
                                          Thickness: ±5%      
                                          Size: ±5%      

                                           

                                          Tube

                                          Tube

                                          A hollow length of material normally circular in section. Most tubes are straight except those made of flexible polymer.

                                          Tolerances        
                                          Outside Diameter: <2mm ±0.05mm    
                                            Polymer ±10%    
                                            Ceramic ±10%    
                                            =<5mm ±0.1mm    
                                            Polymer ±10%    
                                            Ceramic ±10%    
                                            =>5mm ±5%    
                                            Polymer ±10%    
                                            Ceramic ±10%    
                                          Wall Thickness:   ±10%    
                                            Polymer ±20%    
                                            Ceramic ±20%    
                                          Length:  <100mm   ±1mm  >=100mm  +5%/-1%

                                           

                                          Washer

                                          Washer

                                          A thin, flat piece of material with a hole in the middle, used in conjunction with bolts and nuts to distribute the load of a threaded fastener.

                                          Tolerances        
                                          Ceramics: ANSI B18.22M-1981, R1990 (Reg)  

                                           

                                          Wire

                                          Wire

                                          A single or multiple flexible strand of pure metal or alloy.

                                          Tolerances        
                                          Wire diameter: ±10%      
                                          Length: +5%/-1%      

                                                                                  car

                                                                                  Technology

                                                                                  city

                                                                                  constellation

                                                                                  Blog

                                                                                  image

                                                                                  game

                                                                                  culture

                                                                                  constellation